hns - 日記自動生成システム - Version 2.19.7

void GraphicWizardsLair( void ); //

otsune GWL
FreeBSD, AfterEffects, RETAS, animo, DigitalAnime, Linux, Mac OS, Win2k

[Who is otsune?] [title] [message] [Policy] [注目エントリー] [top]
Twitter Status :

Namazu for hns による簡易全文検索
詳しくは 詳細指定/ヘルプを参照して下さい


先月 2003年08月 来月
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30

2003年08月20日(水) [長年日記]

#14 [work][unix] PowerEdge 600SCで/boot/loader.conf.localでhw.ata.tags=1を指定していて刺さった


14 dmesgをメモ:

FreeBSD 4.8-RELEASE-p3 #2: Sun Aug 17 08:19:48 JST 2003
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (1799.81-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
real memory  = 536805376 (524224K bytes)
avail memory = 518836224 (506676K bytes)
Preloaded elf kernel "kernel" at 0xc036d000.
Pentium Pro MTRR support enabled
Using $PIR table, 7 entries at 0xc00fc320
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci0: <PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.10> port 0xecc0-0xecff
 mem 0xfe140000-0xfe15ffff irq 10 at device 2.0 on pci0
em0:  Speed:100 Mbps  Duplex:Full
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xec80-0xecbf mem 0xfe120000-0xfe13ffff,0xfe163000-0xfe163fff irq 7 at device 5.0 on pci0
em0:  Speed:100 Mbps  Duplex:Full
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xec80-0xecbf mem 0xfe120000-0xfe13ffff,0xfe163000-0xfe163fff irq 7 at device 5.0 on pci0
fxp0: Ethernet address 00:02:b3:c7:d0:46
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xec40-0xec7f mem 0xfe100000-0xfe11ffff,0xfe162000-0xfe162fff irq 5 at device 6.0 on pci0
fxp1: Ethernet address 00:02:b3:c7:cf:5a
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 8.0
atapci0: <Generic PCI ATA controller> port 0x8b0-0x8bf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 irq 0 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfe160000-0xfe160fff irq 3 at device 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <PCI to ISA bridge (vendor=1166 device=0227)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci1: <PCI bus> on pcib1
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 300 packets/entry by default
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized.  Default = pass all, Logging = enabled
ad0: 38146MB <IC35L040AVVA07-0> [77504/16/63] at ata0-master BIOSDMA
acd0: CDROM <GCR-8481B> at ata1-master PIO4
default to acceptなのは刺さると恐いから。
このエントリーを含むはてなブックマーク livedoor Clip View blog reactions
Last Updated 2003-08-20 00:00:00 By otsune